iFlight BLITZ Mini F7 Stack V1.1 + 55A 4IN1 ESC For Evoque 20x20mm

PRODUCT DESCRIPTION

FC // BLITZ Mini F7 V1.1 Flight Controller

Top Features:

• IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!
• DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)
• FC INDICATOR LEDS FOR VISUAL DEBUGGING

CHANGELOG:

• 2022/FEB: VERSION UPDATED TO V1.1 / GYRO CHANGED TO BOSCH BMI270 DUE TO AVAILABILITY & PRICE ISSUES WITH MPU6000.

Specs:

• MCU:   STM32 F722
• GYRO:   BMI270
• BAROMETER:   DPS310
• OSD CHIP:   AT7456
• FLASH:   16MB (BLACKBOX FLASH)
• UARTS:   6
• MOTOR OUTPUTS:   4X (SH1.0 CONNECTOR)
• I2C SERIAL:   SDA / SLA PADS
• SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED
• LED CONTROLLER:   YES
• BEEPER PAD:   YES
• FIRMWARE TARGET:   IFRC-IFLIGHT_BLITZ_F722
• MOUNT PATTERN:   20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS
• DIMENSIONS:   30.5X27 MM
• WEIGHT:   5G

WIRING SUGGESTION:

• UART 1 FOR VTX HD / ANALOG
• UART 2 FOR A RECEIVER
• UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
• UART 6 FOR ESC TELEMETRY

TIPS

1. F722 MCU HAS AN INNER INVERTER.
2. SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
3. FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2

ESC // BLITZ Mini E55 4-IN-1 2-6S ESC

SPECIFICATION:

• DIMENSION: 35*42MM
• MOUNTING HOLES: 20*20MM/Φ4MM
• WEIGHT: 11.3G
• SUPPORTS 2-6S LIPO INPUT
• MCU： G071
• CONSTANT: 55 AMPS 
• BURST: 60 AMPS
• CURRENT SENSOR: YES
• BEC: NO
• CURRENT RATE: 100
• SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
• FIRMWARE: BLHELI 32
• TARGET:   IFLIGHT_BLITZ_G1
  

Package included:

• 1x BLITZ Mini F7 V1.1 Flight Controller
• 1x BLITZ Mini E55 4-IN-1 2-6S ESC
• 1 set x silicon grommets
• 1 set x wire harness for F7 Flight controller